《お取り寄せ商品》Solar Power Manager For 12V Lead-Acid Battery

本商品はお取り寄せ商品（輸入代行）です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います（請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です）。納期は仕入先に在庫がある場合、通常1.5～2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。

Introduction

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This medium-power high-efficiency solar power management module allows you to charge a 12V lead-acid battery with a maximum of 4A using a standard 18V solar panel.

Check the brief specification for all Solar Power Manager Series Products.

Solar Power Manager For 12V Lead-Acid Battery is a medium-power high-efficiency solar power management module, which is able to charge a 12V lead-acid battery with a maximum of 4A using a standard 18V solar panel. It is suitable for applications within 100W, such as 12V lighting equipment, security monitoring, small robots, pumps or environmental monitoring stations. It features as MPPT(Maximum Power Point Tracking) function, maximizing the output power of solar panels under various sunlight. Compared with common PWM solar controllers, it can improve charging performance by 10%-30%. Benefited from its small size and light weight, it is easier to embed it in your projects. The module provides dual high-power outputs 5V 5A (OUT1) and 12V 8A (OUT2) and dual USB outputs 5V 2.5A (USB1/USB2). Except USB1, all outputs can be turned ON/OFF by I/O pins of most controllers (3.3V/5V compatible). This feature helps to dynamically power loads and reduce power consumption. Various protection functions are also employed to ensure the safety and stability of the solar systems.

Solar Power Manager For 12V Lead-Acid Battery Board Overview

Build a solar powered system

Features

• Constant voltage (18V fixed) MPPT algorithm, maximizing solar energy conversion
• Designed for standard 18V solar panels and 12V lead-acid battery
• Multiple high efficiency outputs for 12V or 5V large power devices
• Full protection functions, a safe and high efficiency solar power module
• A variety of status indicators, system status at a glance

Applications

• Street lighting
• Intelligent Agriculture
• Environmental Monitoring Station

Specification

• Solar Power Management IC: CN3767
• Solar Input Voltage (SOLAR IN): 15V~25V
• Battery Input (BAT IN): 12V Lead-Acid Battery
• Charge Current: 4A Max Trickle Charging, Constant Current, Constant Voltage, Float Charging Four Stages Charging dedicated for 12V Lead-Acid Battery
• Float Charge Voltage: 13.55V
• Over-discharge Protection Voltage: 10.8V
• Solar Charge Average Efficiency (18V SOLAR IN): 94%
• Outputs^Note1: OUT1 5V 5A, OUT2 12V 8A, USB1 5V 2.5A, USB2 5V 2.5A
• USB1/USB2 Support Three USB Charge Protocols^Note2
  • Apple 2.4A: DP=2.7V, DM=2.7V
  • SAMSUNG 2.0A: DP = 1.2V, DM =1.2V
  • BC1.2: DP=DM=0V (Short)
• OUT1/USB1/USB2 Efficiency: 93%@50%Load
• OUT2 Efficiency: 98%@50%Load
• Quiescent Current: <4 mA
• Protection Functions
• SOLAR IN: Backflow/Reverse Connection Protections
• BAT IN: Over-discharge/Over-charge/Reverse Connection Protections
• OUT1-2/USB1-2: Short Circuit/Over Current/Over Heat Protections
• Operation Temperature: -40℃～85℃
• Dimension: 68.0mm*68.0mm

Note 1: OUT1/USB1/USB2 shared 5A current driving capacity (peak current 8A), that is, the total output power of the three outputs should not exceed 5V*5A=25W (peak 40W).

Note 2: To ensure whether the communication devices you use are compatible with the protocols listed, please consult your communication device manufacturer or retailers for details. If your device does not support the USB charging protocol mentioned above, usually it will limit the charging power to 5V*1A=5W for security sake. This is not caused by the failure of the USB output or insufficient output capability.

Documents

ShippingList

• Sunflower: Solar Power Manager Micro x1
• Black Jumper x3
• Nylon pillar M3*16 x4
• stainless steel screw M3*10 x4
• Aluminum cooling fin (Black) 14*14*7mm x1
• Thermal conductive silicone pad (Blue) 14*14*0.5mm x1
• Aluminum cooling fin (Black) 50*50*12.7mm x1
• Thermal conductive silicone pad (Blue) 50*50*1.5mm x1
• Female DC power jack adapter x1

上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。

商品コード: DFROBOT-DFR0580