《お取り寄せ商品》Freematics Vehicle Data Logger V4--販売終了

本商品はお取り寄せ商品（輸入代行）です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います（請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です）。納期は仕入先に在庫がある場合、通常1.5～2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。

Introduction

Freematics ONE (aka Freematics Vehicle Data Logger V4) is the state-of-the-art vehicle telematics data collector, adapter, logger and transmitter which envolves from the past 3 generations of Freematics Vehicle Data Logger.

Freematics ONE, like its predecessors, comes in the form of a OBD-II dongle which plugs into a car’s OBD-II port. The enclosure is newly designed with sockets and card slots for various purposes around it. And the original 32-bit OBD-II solution has been improved, which has been proven in the previous OBD-II products, with better support for high data rate GPS and additional support for external wireless modules. It also integrats the innovative Bluno (An Arduino Bluetooth 4.0 (BLE) Board) which allows firmware/sketch updating directly from Arduino IDE via micro USB port and wirelessly via BLE.

Freematics ONE supports BLE, GPS and xbee socket, you could choose the compatible accessories you need on the right options.

Freematics ONE plugs into the OBD port usually located under the steering column or slightly to the left of it. To check if your vehicle is OBD-II certified, open your hood and find the sticker that looks like this:

Features

• Powered from OBD-II port (low power consumption)
• Programmable as an Arduino UNO (sketch uploaded via USB or BLE)
• Rapid access to OBD-II PIDs (including VIN)
• Reading and clearing trouble code (DTC)
• Measuring G-force with accelerometer
• Measuring battery voltage with built-in voltmeter
• BLE wireless communication with iOS and Android devices
• High update rate GPS positioning (by external GPS receiver for better signal strength)
• Onboard xBee socket for communication module extension
• microSD data storage (up to 32GB)
• Upgrading OBD-II solution firmware via USB

Specification

• STM32 based OBD-II solution (CAN BUS, K-line, NMEA parsing)
• Compatible with Arduino UNO/Bluno (ATmega328p main controller)
• STM32 and ATmega328p connected by SPI
• TI CC2540 based BLE & USB connectivity
• MPU-6050 MEMS module (accelerometer, gyroscope, temperature sensors)
• Built-in xBee socket for exchangeable wireless communication modules (GSM, WIFI, xBee)
• SIM800L xBee module with self-popping micro SIM socket
• Self-popping microSD slot with cover
• Molex connector for external GPS receiver
• Enclosure dimensions: 60x48x20mm
• Hardware Interfaces:
  • OBD-II male connector
  • microUSB port
  • microSD card slot
  • SIM card slot (if cellular module is present)
  • GPS connector (Molex)
  • xBee socket (inside, 5V or 3.3V VCC)
• Compatibility: Vehicles using following vehicle protocols are supported
  • CAN 500Kbps/29bit
  • CAN 250Kbps/29bit
  • KWP2000 Fast
  • KWP2000 5Kbps

Documents

• Product Users Guide
• Source Code Repository (Github)
• Using ESP8266 WIFI bee with Freematics ONE
• Freematics Data Logging Format
• Data2KML - Open-source utility for converting Freematics CSV file to KML file (Google Earth)
• Support Forum

ShippingList

• Freematics Vehicle Data logger V4 x1
• Micro USB cable x1

上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。

商品コード: DFROBOT-TEL0105